Voided Warranty: Through the entire process of wrapping wires and installing equipment planning the length of wires and routing of wires will help give your case a neater appearance. Next I decided to install the multi-function panel which has CPU, case, HDD temp sensors, USB, firewire and CPU fan speed control. This figure shows an example of combining the temperature sensors in the same wire run that will provide power to the side panel fans. The third figure shows the fan controller. If your going to shorten the lengths of wires without cutting them you can double them up and hide the extra wire with wire wrap. Pictured here the wires that I doubled up would fit inside the spiral wrap so I used split loom and then spiral wrap on the small wire. I inserted the spiral wrap inside the split loom and then used a wire tie to hold them together and give a neat appearance.