Does not generate noise or vibration in Silent Mode.
Pure Copper and pure Aluminum base materials ensure excellent heat dissipation.
Intel Pentium 4 (Socket478), AMD Duron/Athlon/Athlon XP (Socket 462), and Sempron/AMD64 (Socket754/939/940) compatible design for broad compatibility. (To use this product on socket 775, ZM-CS1 must be purchased separately.)
92mm fan inside the FHS maximizes airflow and makes installation easier.
Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

FAN Speed Controller (FAN MATE 2)

• Dimension: 70 (L) x 26 (W) x 26 (H) mm


• Weight: 20g


• Output Voltage: 5V ~ 11V ± 2%


• Connector: 3-Pin

Zalman USA (CNPS7000B-AlCuLED) CNPS7000B-AlCu Replaces the CNPS7000AAICU. The 7000B has slightly im

Despite the fact that computers have become commonplace at home and at workplaces for a long time, true user friendliness of the computers is still a long shot. Zalman Tech strives to make that goal a closer reality through extensive research and development of its products and will continue to put efforts to creating more enhanced levels of user friendliness in computing.PRODUCT FEATURES: Does not generate noise or vibration in Silent Mode; Pure Copper and pure Aluminum base materials ensure excellent heat dissipation; Intel Pentium 4 (Socket478), AMD Duron/Athlon/Athlon XP (Socket 462), and Sempron/AMD64 (Socket754/939/940) compatible design for broad compatibility; 92mm fan inside the FHS maximizes airflow and makes installation easier; Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan performance.

Perfect solution for Socket 478
I use this fan on my AMD Athlon XP 2100+. My old after-market fan died after 4 years of constant use so I needed a replacement. The Zalman CNPS700B fan quietly keeps my gaming/3D modeling computer nice and chilly even during 100% processing load. It was easy to install. It weighs just a little bit more than the Asus A7X motherboard recommends but there have been no problems. This product is quality built. It might be more expensive than other heat-sink/fan options but Zalman products (especially this one) is well worth it.

A quite fan
This is a quite fan with a huge heat sink. Easy to install, it took
about 15 min. to complete. The heat sink is so large that it just might
keep the cpu cool without the fan. A good bargin in my opinion.

Fits in an Antec Aria!
Hey folks, let me drop a very brief review here. I just built an AMD64 3200+ (Venice) rig in an Antec Aria case with THIS CPU fan/heatsink (the non-LED) version. Fits right into the Aria and I have the fan at about 1500 rpm. It’s nearly silent and it keeps the CPU very cool. 100% utilization (UD Cancer Research + BOINC Seti / Rosetta), keeps the CPU at 49 degrees. The important message here is: IT FITS IN AN ARIA!

Silent and terrific
This cooler is super-quiet to silent, depending on how you set the variable fan speed (and the lowest speed will work for many people). The mix of aluminum and copper helps make it far lighter than all-copper fans with only a couple of degrees C loss of cooling. Works with a variety of processors. It’s big, though -- make sure it will fit on your motherboard and in your case before ordering. Most newer motherboards will be fine with this -- the stock processor that came with my Athlon 64 was as big as this one.

Overheating Problems Solve
I just have one word for describe this product: AMAZING!, if any of you person tired of overheating problems i really solved it with this, and also it’s pretty silent.

Computer Comfiguration:
Case Intel
Intel 865GLC
Pentium IV 3.2 1Meg Cache
1 Gig RAM
Ati Radeon 9600xt
Sata 160gb
3Com Sblive